WAW-1000D Computerized Electro-hydraulic Servo Universal Testing Machine

 WAW-1000D Computerized Electro-hydraulic Servo Universal Testing Machine

1. relative test and manufacturing method

GB/T228.1,ISO 6892-1,ASTM E8,GB/T 232,ISO 7438,GB/T 2611,GB/T 16825.1,ISO 7500-1,etc

for more testing machine, please visit www.wtbte.com

2. applications

This product is an ideal high-quality testing equipment for scientific research institutions, universities, metallurgy, machinery manufacturing, boiler vessels, aerospace and other enterprises and institutions. This series of models adopts hydraulic loading, convenient operation, stable performance, safe and reliable. The test operation and data processing conform to GB/T228.1-2010 "Metallic Material Room Temperature Tensile Test Method", according to: GB, ASTM, DIN , ISO, JIS, BS and other standards to conduct experiments.

3. Machine features

3.1 mechanical structures

         Bottom oil cylinder structure

        Tension test space between upper and middle crossbeam, compression,bending test space between middle crossbeam and workbench.

        Test space adjusting through movement of middle crossbeam to perform tension,compression and bending test

        Harding contacting mode of working bench and oil cylinder,medium pressure balanced piston always lay at the center of oil cylinder, effective reduce friction between oil cylinder and piston, test measuring more accurate.

        Precise processed structure members use steel casting after heating treatment

        Columns and driving parts use high performance alloy steel and strictly checked and carefully installed, main loading frame is high rigid and in good stability.

        Oil cylinder use gapless sealing,no oil leakage

        The jaws are clamped by a central double cylinder with direct push, overcoming sliding and deformation, convenient for install and uninstall and prolong working time

3.2 control and measuring system

        Full digital closed loop control and measuring, computer displays test procedures and test, computer software deal with test data and allow re-analyze after test by zoom test curves and display value at each point on the curves

        Control mode of force control, deformation control, displacement control, and different control mode can switch smoothly during test according to the setting sequence before test.

        Software calculate ReH(upper yield strength), ReL(lower yield strength),Rp0.2(set non-proportional elongation strength),Rt0.5(set total elongation strength),Rm(tension strength),E(elastic modulus) and other special parameters

        Force keeping functions at constant force loading, deformation loading and displacement loading

        Use database manage mode, auto save test data and test curves

        Software and mechanical protecting functions of over load, over current, over voltage, over speed, limit stroke, etc.

        Software allow client make new test steps according to different test requirement

3.3 optional functions

Machine allows to equip with special test grips for different tests, such as tensile test grips for bolts and nuts, bending/flexural test accessories for rod and plate, shear test accessories for round bar shear test, compression test grips for concrete or cement compression test, flexural/bending test, splitting tension test, elastic modulus test and other test accessories according to order.

4. technical parameters

1	Capacity	600KN
2	Force measuring range	2%-100%FS
3	Accuracy of test force	0.5%
4	Force resolution	1/300000
5	Constant stress control range	2-60(N/mm2•s-1)
6	Accuracy of stress rate	0.5%
7	Constant displacement control range	0.05-100mm/min
8	Accuracy of displacement rate	0.5%
9	Tensile space	700mm
10	Compression space	600mm
11	Flat specimen grips clamping range	0-40mm
12	Flat specimen grips clamping width	80mm
13	Round specimen grips clamping diameter range	13-26mm,26-40mm
14	Specimen clamping length	80mm
15	Bending accessory span	600mm
16	Piston stroke	250mm
17	Diameter of upper and lower compression plate	200x200mm
18	Distance between columns	500mm
19	Max. raising speed of working bench	120mm/min
20	Max. speed of crossbeam	200mm/min
21	Overall motor power	Around 2.1kw
22	Dimension of main loading frame	1030x850x2250mm
23	Weight of main loading frame	2900kg
24	Dimension of control cabinet	1160x760x910mm
25	Weight of control cabinet	Around 200kg
26	Specimen clamping mode	Hydraulic clamping